CR801 Series

Templates | Part Numbers and Descriptions | Print Catalog Page

CR801S / CR801 | Series Door Closer
*SAME HOLE PATTERN AS NORTON 8301/8501

  • Cal-Royal’s Finest Hydraulic Door Closer Series. Meeting The Highest Industry Standards, Grade 1
  • Heavy-Duty Double Lever Arm With Extra Smooth Action Full Feature Multi-Size Commercial Door Closer For Use In Office Buildings, Shopping Centers And Other Commercial Buildings
  • Standard Back-Check Function
  • Optional Slim / Full Plastic Cover
  • Optional Adjustable Delayed Action Barrier Free For Handicapped Or Elderly
  • BHMA Certified Lifetime Warranty

Slim / Full Cover Multi-size Full Feature Closer ANSI 156.4, Grade 1
UL Listed, Conforms to Standards UL10C and UBC7-2-1997

Features:

  • ANSI 156.4 Grade 1: UL listed for fire door assemblies
  • Universal application. Non-handed for standard, top-jamb or parallel arm installation
  • Hydraulic door closer with standard adjustable back-check function
  • Non-sized, 1 thru 6. FACTORY PRESET SIZE 3
  • Adjustable closing and latching speed by two separate regulating valves
  • Standard slim plastic cover (CR801S)
  • Standard full plastic cover (CR801)
  • Available in Alum, Duro, Gold
  • Optional adjustable delayed action (DA)
    Preset at the factory for approximately 20 seconds, between 70° and 0°
    Delay time easily adjusted up to 1 minute
  • Barrier free (BF) Meets ADA regulation
    Size 1 thru 6. Engineered with reduced spring power to provide easier opening for handicapped or elderly

Reduced Opening Force CR801S / CR801 Door Closers

IMPORTANT Any door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is chosen, installed and adjusted based on ADA or other reduced opening force requirement may not provide sufficient power to close and latch a door. Location of door could also affect action and efficiency of door closer.

Replacement Hole Pattern As Norton CR801S/CR801 & Yale 3301/3501
DESCRIPTION SIZE
A. Length of Closer Body 12-3/4"
B. Horizontal Mounting Holes 12"
C. Vertical Mounting Holes 3/4"
D. Width of Closer Body 1-1/4"
E. Projection from Door 2-1/8"

Accessories:

  • Parallel hold-open adjustable arm (Non-handed). 901/902
  • Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe. SPAS/900
  • Optional, non-handed parallel arm features solid forged steel main arm and forearm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. HOSRPS/900
  • Slide track arm. TRACK/900 with hold open
  • Flat drop bracket 850
  • Extended long arm for top jamb mount with deep reveals. 900 EXT
  • Super rigid non-handed parallel arm with spring loaded stop in the soffit shoe. Equivalent to LCN SPRING CUSH ARM (900SPRING)
  • Super rigid parallel arm stopper hold open, non-handed with spring loaded stop in soffit shoe. Handle controls hold open function. Equivalent to LCN SPRING H-CUSH ARM (900HOSPRING)

DOOR WIDTH 36" 42" 48"
**8.5 lbs. CR801S/
CR801
CR801S/
CR801
CR801S/
CR801
**5.0 lbs. CR801S/
CR801
CR801S/
CR801
CR801S/
CR801
** Maximum Opening Force

Table of Sizes:

Closing power of closers may be adjusted 50%.
Shows recommended range of door width for closer size.


Cross References

Cal-royal corbin dorma dor-o-matic hager lcn norton russwin sargent yale
cr801s
Slim cover
DC3200 x M76 8600 SC80 5200SLC 1460-72 8301 9000 1430 3301
cr801
full cover
DC3200 8600FC SC80FC 5200FC 1460FC 8501 DC6200 1431 3501

The data on this chart represents our judgment of which are most similar. Since no product is exactly alike the information has been obtained from trade sources. It is not guaranteed nor represented that any specific product exactly equals any other product. Door closer body size may be different.