Power Supplies
- Product Code:
- Availability: In Stock
-
$0.00
CRPS1N
The CRPS1N is a heavy duty, high quality, low cost solution for powering a single latch retracting exit device. The solid-state design insures years of trouble-free operation. The power supply delivers raw, unregulated DC current which is ideal for the extreme in-rush requirement of most motor driven electric latch retracting exit devices. The power supply comes housed in a sturdy, yet compact metal enclosure.
- Power supply delivers the necessary high current in-rush for a single exit device
- Solid-state design eliminates problems associated with mechanical relays
- Single input/output
CRPS220/CRPS220B
The CRPS220 and CRPS220B (Battery Backup) are regulated, linear power supplies rated at 2 Amps @ 24V DC to (2) PTC fused outputs. It also provides (2) solid-state input triggers, protects system relays from shorts, grounds and surges. These power supplies may also be used to power electrified mortise and cylindrical locks, electric strikes, mag locks, motorized exit devices.
- Built to run up to 2 locks, exit trim, and LP Motor / Solenoid kits
- Two independent inputs / outputs
- Linear design insures ample inrush / hold current for latch retraction
- Door mounted LED Power Indicator
- Fire alarm link
- Removable Euro-style terminal blocks allow for easy installation
- No hassle 3-year warranty
Additional Features (CRPS220B Only):
- Regulated, independent battery charging
- Automatic uninterrupted backup circuit
- Battery cables included
- Requires (2) 12V DC 7AH batteries
- Batteries not included
CRSW3
The CRSW3 power supply is a low cost, regulated switching power supply. It is designed specifi cally to supply power to low current DC devices such as mortise locks, cylindrical locks and electric strikes. The CRSW3 supplies 2.4A @ 27VDC and provides (3) non-fused outputs. The CRSW3 comes housed in a 10” x 10” x 4” sturdy metal enclosure. Adjustable output voltage (22-27V under load)
- No hassle 3-Year Warranty
CRPS440B/CRPS480B
The CRPS440B and CRPS480B (Battery Backup) are regulated, linear power supplies rated at 4 Amps @ 24V DC to (4) or (8) PTC fused outputs. It also provides (4) or (8) solid-state input triggers, protects system relays from shorts, grounds and surges. These power supplies may also be used to power electrified mortise and cylindrical locks, electric strikes, mag locks, motorized exit devices.
- Adjustable output voltage from 24-27VDC
- Built to run up to 4 or 8 locks, exit trim, and LP Motor / Solenoid kits
- 4 or 8 independent inputs / outputs
- Linear design insures ample inrush / hold current for latch retraction
- Door mounted LED Power Indicator
- Fire alarm link
- Removable Euro-style terminal blocks allow for easy installation
- No hassle 3-year warranty
Additional Features (CRPS220B Only):
- Regulated, independent battery charging
- Automatic uninterrupted backup circuit
- Battery cables included
- Requires (2) 12V DC 7AH batteries
- Batteries not included
CRPS1N
- Input voltage – 120V AC, 60 Hz, 2 Amp Input Fuse
- Output voltage – 24V DC @ 1A
- Temperature range – 0 to 120F
- 1 Solid-State input / output (input triggered by dry contact)
- LEDs
- RED = A/C Power indicator
- GREEN = D/C Output Indicator
- Enclosure dimensions: 11” x 11” x 4”
CRPS220/CRPS220BB
- Input Voltage – 120V AC, 60 Hz, 2 Amp Input Fuse
- Output Voltage – 24V DC @ 2A
- 2 Solid-State input / output (input triggered by dry contact)
- LEDs
- RED = A/C Power indicator
- GREEN = D/C Output Indicator
- Enclosure dimensions:
- 11” x 11” x 4” (CRPS220)
- 13" x 15.5" x 5" (CRPS220B)
CRSW3
- Input voltage – 110 or 220V AC
- Output voltage – 1A @ 27V DC
- (3) Non-fused outputs
- Enclosure dimensions : 10” x 10” x 4”
CRPS440B/CRPS480B
- Input Voltage – 120V AC, 60 Hz, 2 Amp Input Fuse
- Output Voltage – 24V DC @ 4A
- CRPS440B: 4 Solid-State Input / Output (input triggered by dry contact)
- CRPS480B: 8 Solid-State Input / Output (input triggered by dry contact)
- Power Tap - 24V DC @ .5A
- LED’s:
- RED = A/C Power indicator
- GREEN = D/C Output indicator
- ORANGE = Battery Output Indicator
- Enclosure dimensions : 13” x 15.5” x 5”
Power Supplies for Electrified Exit Devices
 |
