Cal-Royal Products, Inc.

RX (request to exit) signal switch is used to signal the use of an opening from the push side. When the push pad is depressed, the switch is activated. These devices are equipped with an internal SPDT (single pole double throw) switch that monitors the touch bar.

LX (latch bolt monitoring) signal switch monitors both egress and access of an opening. When the latch bolt is retracted, the switch is activated. These devices are equipped with an internal SPDT (single pole double throw) switch that monitors the latch bolt position.

LX and RX switches can be combined.

LX, RX switches can be used in combination with ELR (electric latch retraction) option.

KIT INCLUDES:

• 1 - Rex Sticker
• 2 - Phillips Head Screws
• 2 - Washers
• 1 - Cable Tie Mount
• 1 - REX Switch with 4’ Lead
• 1- Cable Tie

RX or LX - Switch rated 0.5 amps @ 24VAC / DC resistive Low current RX or LX. Switch rated 0.5 amps @ 24VAC / DC resistive

Factory Installed, Specify (Prefix):

• RX7700 Request to Exit switch for fi eld installation
• LX7700 Latch bolt Monitoring switch for fi eld installation
• LXRX7700 Latch bolt Monitoring / Request to Exit Combination

Installation Instruction

• Installation Instruction - RX9800
• Installation Instruction - RX7700
• Installation Instruction - RX9800-M
• Installation Instruction - LX9800
• Installation Instruction - LX7700

[Download File]

[Download File]

• Applicable for 9800, 7700 and 2200 series exit device
• RX (REQUEST TO EXIT) signal switch features is used to signal the use of an opening from the push side.
• LX (LATCH BOLT MONITORING) signal switch monitors both egress and access of an opening.
• When the push pad is depressed, the switch is activated
• These devices are equipped with an internal SPDT (SINGLE PULL, DOUBLE THROW) switch that monitors the touch bar
• Field install